Nano CO2 Regulator With Solenoid Magnetic Valve And Adjustable Output Pressure
System Customisation
Key Facts
- Perfect for nano or small aquariums.
- Highest quality design and manufacture.
- Adjustable output pressure 0-8 bar to meet the needs of any aquarium (20L - 500L).
- 12v Solenoid magnetic valve allows for CO2 to be switch on/off at defined times. Mains transformer included.
- High-precision needle valve for ultimate dosing control as low as 1 bubble / 10 seconds.
- Pressure gauge displaying output / working pressure.
- Connects to nano CO2 cartridges with 5/8"-18 UNF thread (typically 88g and 95g cartridges).
- Works with any CO2 diffuser.
- Choice of plug and voltage.
Description
The regulator features adjustable output pressure to ensure it will meet the pressure requirements needed to run the best CO2 diffusers. It also features a high-precision needle valve which enables incredibly fine adjustment of CO2 dosing as low as 1 bubble every 10 seconds. The integrated solenoid magnetic valve enables the CO2 flow to be shut off overnight when the aquarium plants are not photosynthesising; this means you are not wasting CO2 by dosing when it's not needed, this in turn means your CO2 supply will last much longer and save money in the long-term. The 12v DC solenoid (mains transformer included) provides safe, low temperature, and guaranteed no noise operation.
It also has a pressure gauge that displays the output / working pressure, which can be adjusted by means of the pressure adjuster knob. The regulator attaches to mini CO2 cartridges with thread standard of 5/8"-18 UNF (also sold by CO2 Supermarket).
Instructions
- Set the output pressure to minimum by turning the pressure adjuster knob fully anticlockwise.
- Close the needle valve by turning fully clockwise.
- Screw CO2 cartridge into the regulator. You may feel some resistance as the pin inside the regulator pierces the top of the CO2 cartridge to release the gas. Once the cartridge is screwed in, it should not be removed until all gas has been used.
- Position the CO2 cartridge in the base/holder. The base has a sticky pad underneath, which can be used to provide additional support if needed.
- Plug the solenoid into mains plug and switch on.
- Turn the pressure adjuster clockwise until the pressure gauge reads 0.3 MPa (roughly 40 PSI). This is a good starting point for most CO2 diffusers. It can be increased if necessary.
- With the bubble counter attached, turn the needle valve anticlockwise to achieve the bubble rate desired. 1 bubble / second is suitable for a 150L aquarium - adjust your dosing in accordance to this, i.e. 1 bubble / 2 seconds for 75L aquarium.
- Click here to read the full Nano CO2 Regulator setup guide
Customer Reviews
Average Rating
-
William K.
6th Dec 2024
I love this little Nano regulator! It's perfect for my tiny aquarium and does the job with zero hassle. I love this little Nano regulator! It's perfect for my tiny aquarium and does the job with zero hassle.
-
Iain F.
26th Nov 2024
It's compact, fits perfectly under my tank, and the adjustable output pressure is a fantastic feature for precise control and the needle valve is very accurate It's compact, fits perfectly under my tank, and the adjustable output pressure is a fantastic feature for precise control and the needle valve is very accurate
-
Thomas F.
5th Nov 2024
Compact and very solid build quality. The needle valve is responsive and easy to set the CO2 levels Compact and very solid build quality. The needle valve is responsive and easy to set the CO2 levels
-
Helen D.
1st Nov 2024
Very compact and fits snugly without using too much of my limitted space. Very compact and fits snugly without using too much of my limitted space.
-
Sophie S.
30th Oct 2024
It’s really well-made and fits neatly behind the tank, keeping things nice and tidy. Definitely worth every penny! It’s really well-made and fits neatly behind the tank, keeping things nice and tidy. Definitely worth every penny!
-
Katie L.
28th Oct 2024
The adjustable output pressure and precise needle valve are features you'd expect in larger, more expensive models and when compared to the Tropica regulator I had before, this one is hands down superiror! The adjustable output pressure and precise needle valve are features you'd expect in larger, more expensive models and when compared to the Tropica regulator I had before, this one is hands down superiror!
-
Alex J.
27th Oct 2024
The solenoid valve is super quiet, and the overall build feels sturdy and reliable. The solenoid valve is super quiet, and the overall build feels sturdy and reliable.
-
Ivor C.
24th Oct 2024
It’s compact and sturdy and keeps CO2 dosing at just the right level and perfect for a small tank It’s compact and sturdy and keeps CO2 dosing at just the right level and perfect for a small tank
-
Harison F.
7th Oct 2024
Very high-spec for a little regulator; 12v solenoid, adjustable output pressure and a very accurate needle valve. So much better than the tropica regulator it has replaced. Very high-spec for a little regulator; 12v solenoid, adjustable output pressure and a very accurate needle valve. So much better than the tropica regulator it has replaced.
-
Ryan B.
30th Aug 2024
Great build quality. Great build quality.
Someone added a product to their cart
View ProductSomeone added a product to their cart
View Product