CO2 Bubble Counter & Integrated Check Valve For Regulators
£10.99
Regulator CO2 Bubble Counter With in-built Check ValveKey Facts
-
Essential component of any CO2 system.
-
Accurately monitor and adjust your CO2 dosing.
-
Attaches directly to a regulator's needle valve.
-
In-built check valve prevents water siphon / back-flow.
-
Fits 4/6mm Tubing.
-
1/8" NPT female thread.
-
Easy viewing of bubbles.
Description
A bubble counter is an essential component of a CO2 system. Without one you would simply be guessing at the quantity of CO2 you are dosing into your aquarium, and that makes accurately setting and adjusting your CO2 dosing impossible. A bubble counter solves this problem by enabling you to count how many bubbles per minute you are dosing, and can then make accurate refinements.
The bubble counter also has an in-built check valve to prevent water siphoning from your aquarium and into your sensitive (and expensive) components such as solenoid or regulator. Once water has entered these components it is difficult to remove, and can cause complete blockage or inconsistent output. Therefore, eliminating the possibility of that from occurring is essential.
This bubble counter screws directly onto the needle valve of your regulator. The tubing attaches to the opposite end.
The bubble counter must be vertical to allow the bubbles to float upward - please therefore ensure your regulator/needle valve will allow this configuration when attached to your gas cylinder. If not, an Inline Bubble Counter can be used instead, which has tube connection fittings at each end.
The bubble counter also has an in-built check valve to prevent water siphoning from your aquarium and into your sensitive (and expensive) components such as solenoid or regulator. Once water has entered these components it is difficult to remove, and can cause complete blockage or inconsistent output. Therefore, eliminating the possibility of that from occurring is essential.
This bubble counter screws directly onto the needle valve of your regulator. The tubing attaches to the opposite end.
The bubble counter must be vertical to allow the bubbles to float upward - please therefore ensure your regulator/needle valve will allow this configuration when attached to your gas cylinder. If not, an Inline Bubble Counter can be used instead, which has tube connection fittings at each end.
Instructions
- Unscrew the top cap and fill 3/4 with water (tap water is fine).
- Firmly screw the top back on.
- Ensure O-ring is correctly position at the bottom of the threads in the well at the bottom of the bubble counter.
- Screw the bubble counter onto the needle valve.
- Unscrew the compression collar from the top of the bubble counter.
- Feed tubing through the collar and firmly tighten to hold the tubing in place.
- Click here to read the full bubble counter setup guide
Customer Reviews
Average Rating
-
Prodromos A.
20th Mar 2025Very fast shipping to Cyprus Very fast shipping to Cyprus -
Roger T.
14th Mar 2025Great little bubble counter. Easy to install and read. Great little bubble counter. Easy to install and read. -
Mark B.
25th Feb 2025It attached fine to my regulator and does exactly what it's meant to. Came with a little O ring inside the bubble counter to fit to the needle valve before attaching the bubble counter It attached fine to my regulator and does exactly what it's meant to. Came with a little O ring inside the bubble counter to fit to the needle valve before attaching the bubble counter -
Stephen L.
20th Feb 2025Fast delivery, well packaged Fast delivery, well packaged -
Christopher .
3rd Feb 2025The bubble counter is well made and works efficiently. The top sealing washer was missing, there is a good chance that it fell out during my assembly and was lost. I emailed CO2 Supermarket about it, who very kindly sent a replacement straight away. Excellent service. The bubble counter is well made and works efficiently. The top sealing washer was missing, there is a good chance that it fell out during my assembly and was lost. I emailed CO2 Supermarket about it, who very kindly sent a replacement straight away. Excellent service. -
Shaun T.
18th Dec 2024The construction feels solid, and it's doing its job perfectly. Just make sure you put the O-ring in properly to avoid leaks - I learnt that the hard way! The construction feels solid, and it's doing its job perfectly. Just make sure you put the O-ring in properly to avoid leaks - I learnt that the hard way! -
John W.
13th Dec 2024Easy to control, convenient as you fit it direct to the main body no extra fitting place required. Easy to control, convenient as you fit it direct to the main body no extra fitting place required. -
Andrew G.
9th Nov 2024Works well and the integrated check valve is very handy so it actually does two jobs in one Works well and the integrated check valve is very handy so it actually does two jobs in one -
Sharron C.
4th Nov 2024Very sueful. Just attach it to your regulator, and you're all set. Very sueful. Just attach it to your regulator, and you're all set. -
Dougie C.
2nd Nov 2024Does what it's supposed to without any fuss. the integrated check valve is great for keeping water out of the regulator. No leaks or issues. Does what it's supposed to without any fuss. the integrated check valve is great for keeping water out of the regulator. No leaks or issues.
Someone added a product to their cart
View ProductSomeone added a product to their cart
View Product