Aquarium 4 Way CO2 Splitter For Solenoid Or Regulator

5 [2 Reviews]

£42.99

Aquarium 4 Way CO2 Splitter for Solenoid or Regulator

Key Facts

Split your CO2 supply from one source to four outputs.
Easy to install, requiring no modification to the regulator.
No need to purchase multiple regulators and cylinders.
Accurately adjust flow rate for each output using accurate needle valve.
Made of Brass and Alloy, very durable and will never rust.
For 4/6mm tubing.
Comes with 57mm extension for regulator attachment.

Description

Using a splitter on your regulator you can split a single CO2 source to three separate outputs. For example, if you need to power multiple diffusers or have more than one aquarium.

A splitter saves the cost of purchasing and maintaining more regulators and CO2 cylinders.

Easy to install; simply screws onto your existing regulator needle valve. Supplied with short and long extension to ensure the splitter assembly is clear of the regulator body or pressure gauges.

Instructions

Unscrew compression collar from needle valve or regulator.
Place small O-ring over needle valve nipple.
Locate the extension provided with the splitter set. Check there is an O-ring at the end of the extension. The O-ring should be seated at the bottom of the thread.
Screw the extension end that has the O-ring onto needle valve.
Locate the splitter assembly and check there is a small and large O-ring deployed on the male thread.
Screw the splitter onto the extension and tighten fully.
Adjust flow of CO2 for each output using the needle valves.
Click here to read the full CO2 Regulator Splitter setup guide

Customer Reviews

Average Rating

R

Romaniuc D.

5

17th Sep 2017

Made from high grade aluminum alloy and stainless steel, the solid constructions ensure long-lasting durability and dependability. -With this splitter, you can easily connect up to multi CO2 diffusers/supplies from a single CO2 cylinder. Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow. Connector padded with a rubber gasket for better airtight sealing. read more... Made from high grade aluminum alloy and stainless steel, the solid constructions ensure long-lasting durability and dependability. -With this splitter, you can easily connect up to multi CO2 diffusers/supplies from a single CO2 cylinder. Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow. Connector padded with a rubber gasket for better airtight sealing. Each pack comes with a CO2 splitter and an extension tube bar. I recommend anyone
A

Ahmed A.

5

11th Apr 2017

Thank you ,,,, great Thank you ,,,, great