M10x1 To DIN 477 Advanced Adapter For Disposable CO2 Cylinders

4.9 [60 Reviews]

£19.99

M10x1 to DIN 477 Advanced Adapter For Disposable CO2 Cylinders

£1.99

O-Ring Seal for Disposable Cylinder Adapters (2 pack)

Key Facts

Use disposable CO2 cylinders as your CO2 source.
Converts disposable CO2 cylinder thread (M10x1) to DIN477 / JIS m22-14 / BS 341 No. 8 / W21.8-14 / .860" x 1/14 (covers UK, Europe and Asia).
Use your existing CO2 regulator without any modification.
Advanced adapter design enables secure connection between regulator and cylinder before releasing the gas.
Robust design and manufacture - will last a lifetime.
Easy installation.

Description

Our advanced adapter design will allow you to connect a standard CO2 regulator (with DIN477 / JIS m22-14 / W21.8-14 / .860" x 1/14 nut - covers UK, Europe and Asia) to a disposable CO2 cylinder. Easy setup, with no chance of leaks.

Disposable CO2 cylinders are readily available from a wide range of retailers, including DIY stores and car maintenance shops, ensuring a supply of CO2 is always easy to obtain.

Instructions

Ensure the adapter's valve pin is full retracted by turning the adjuster knob anti-clockwise.
Screw the adapter onto the disposable CO2 cylinder and tighten as much a possible by hand.
Attach your regulator to the adapter using an appropriate wrench or spanner.
Turn the release valve of the adapter to start the flow of gas.
Click here to read the full Advanced Disposable Cylinder Adapter setup guide

Customer Reviews

Average Rating

4.9

H

Hamid S.

4

16th Dec 2024

The build quality is solid and it installed without any issues. I was a little thrown by the on/off tap setup at first and thought it was a valve and you actually have to turn it clockwise to release the gas, not anticlockwise as you would with a valve, but once I realised it’s been smooth sailing. The build quality is solid and it installed without any issues. I was a little thrown by the on/off tap setup at first and thought it was a valve and you actually have to turn it clockwise to release the gas, not anticlockwise as you would with a valve, but once I realised it’s been smooth sailing.
P

Paul D.

5

26th Nov 2024

No problems with it, works as it should. No problems with it, works as it should.
R

Ron S.

5

22nd Nov 2024

Just what I needed to connect my standard CO2 regulator to a disposable cylinder without any hassle Just what I needed to connect my standard CO2 regulator to a disposable cylinder without any hassle
L

Lewis H.

5

1st Aug 2024

This made getting the co2 cylinder much easier because the welding cylinders are sold in toolstation which is just down the road from me. This made getting the co2 cylinder much easier because the welding cylinders are sold in toolstation which is just down the road from me.
D

David P.

5

2nd May 2024

Fit as expected on the Ultimate-Pro Dual Stage CO2 Regulator. And the Sealey CO2 disposable connected onto it without any issues Fit as expected on the Ultimate-Pro Dual Stage CO2 Regulator. And the Sealey CO2 disposable connected onto it without any issues
C

Christopher D.

5

31st Jan 2024

Useful adapter and means I can get the CO2 (welding co2 cylinder) from Toolstation Useful adapter and means I can get the CO2 (welding co2 cylinder) from Toolstation
R

Roji S.

5

16th Nov 2023

Very useful! Mean I can get the gas from Toolstation for my CO2 system Very useful! Mean I can get the gas from Toolstation for my CO2 system
H

Hugh K.

5

17th Oct 2023

Very very useful takes the drama out of connecting the regulator Very very useful takes the drama out of connecting the regulator
J

Jim J.

5

6th Oct 2023

It adapts the thread size just like it should It adapts the thread size just like it should
A

Alastair S.

5

4th Sep 2023

Very useful adapter so I can use welding cylinder from toolstation Very useful adapter so I can use welding cylinder from toolstation