Home > CO2 Diffusers > Submersible Reactor CO2 Diffusers > Reactor CO2 Diffuser - Small For Aquariums Up To 80l

Reactor CO2 Diffuser - Small For Aquariums Up To 80L

4 Reviews

£10.99

Reactor CO2 Diffuser - Small for Aquariums up to 80L

Update Cart

Key Facts

Achieve near 100% diffusion.
Easy to use and install.
Suitable for 12mm/16mm tubing (12mm internal / 16mm external). Click here for tubing size advice
Internal tank deployment only.
Water inlet and outlet can be adjust to 360 degree according to your desired use.
Size: 5.3cm Ø x 14cm height.
Tank applicable: up to 80L.
Suggested flow rate: 180L/H - 200L/H.

Description

Reactor diffusers provide excellent levels of CO2 diffusion by ensuring the CO2 cannot escape the reactor unit until it has fully diffused in the aquarium water. This means there is very little CO2 wastage, and a reactor will pay for itself in the long run vs a regular diffuser.

The reactor also contains rough and pitted plastic balls, which provide a surface that the CO2 can attach and remain in suspension in the water until it is completely diffused.

Instructions

Reactors are installed on the return / outflow tubing from a filter as the water is reintroduced to the aquarium.
This range of submersible reactors *must* be installed within the aquarium.
Cut or replace your filter tubing with PVC tubing.
Attach filter tubing to corresponding inlet/outlet of the reactor.
Connect CO2 supply to CO2 inlet of the reactor.
Turn filter and CO2 on and allow reactor to fill with water.
Invert (turn upside down) the reactor to eject any trapped air.
Adjust CO2 rate until desired level of dosing is achieved.

Related Products

Regular Size ISTA Max Mix Mixer Reactor Diffuser for planted aquariums

Mixer Reactor CO2 Diffuser - Regular for Aquariums up to 150L

Customer Reviews

Average Rating

Individual Reviews

Graham F. Verified Buyer 5th Nov 2023

This simple reactor dissolves CO2 with 100% efficiency, plus it doesn't create those annoying micro bubbles that disturb your viewing of the aquarium. I've removed the black plastic balls from mine and set it up inverted: water in the top and CO2 in the bottom - that way it acts as a bubble counter too! Excellent results. Recommended. This simple reactor dissolves CO2 with 100% efficiency, plus it doesn't create those annoying micro bubbles that disturb your viewing of the aquarium. I've removed the black plastic balls from mine and set it up inverted: water in the top and CO2 in the bottom - that way it acts as a bubble counter too! Excellent results. Recommended.

John E. Verified Buyer 5th Dec 2016

Good buy. I recommend this seller Good buy. I recommend this seller

Grant N. Verified Buyer 16th Feb 2016

This product is useless! I bought it to increase the co2 dissolution however it doesn't serve the purpose. The CO2 just pops out the other end. I am going back to my ceramic diffuser which worked better than this. This product is useless! I bought it to increase the co2 dissolution however it doesn't serve the purpose. The CO2 just pops out the other end. I am going back to my ceramic diffuser which worked better than this.

Cyril B. Verified Buyer 26th Oct 2015

It traps the CO2 inside the unit well but some does escape so I put some filter sponge in the bottom to trap any CO2 trying to escape. It traps the CO2 inside the unit well but some does escape so I put some filter sponge in the bottom to trap any CO2 trying to escape.